Price:
US$13.49
Free Shipping
CH9121 STM32 Serial Port RS232 to Ethernet Network Module TTL Transmission Module Industrial Microcontroller
Compatibility
To confirm that this part fits your vehicle, please enter your vehicle's details below.
-
Year:
Select
-
Make:
Select
-
Model:
Select
-
Submodel:
Select
-
Trim:
Select
-
Engine:
Select
- Clear All
This part is compatible with 0 vehicle(s).
Show all compatible vehicles
Show all compatible vehicles
This part is compatible with 1 vehicle(s) matching
This part is not compatible with
Recent searches
- Year
- Make
- Model
- Submodel
- Trim
- Engine
Overview:
RS232 to Ethernet, 5~18V power supply, one-button setting parameters, AT means to modify the module parameters in real time, automatically obtain IP, one button to restore factory settings. The module is a universal serial-to-Ethernet transparent transmission device, which can be connected to MCUs such as 51, AVR, PIC, ARM, etc. or other serial port (TTL) devices.
Features:
– Support 5V or 3.3V power supply, choose one;
– Serial TTL level, pin IO compatible with 3.3V and 5V voltage;
– Serial port baud rate supports 300 ~ 921600bps;
– The serial port supports full-duplex and half-duplex serial communication, and supports RS485 transceiver automatic switching;
– Two-way transparent transmission of serial data and network data;
– Support MDI/MDIX polarity automatic conversion, cross-connect or directly connect the network cable to any connection, the module automatically switches;
– Support DHCP to automatically obtain IP address and support DNS domain name access;
– Support KEEPALIVE mechanism;
– Support virtual serial port software, virtualize the network port into a computer COM port;
– Working mode supports TCP CLIENT, TCP SERVER, UDP CLIENT and UDP SERVER 4 modes;
– Supports 10/100M, full-duplex/half-duplex adaptive Ethernet interface, compatible with 802.3 protocol;
Set the serial port and network parameters of the chip through software and serial commands, and save the parameters after power off;
– Search and query all devices in the LAN through the UDP broadcast protocol to facilitate unified management of devices;
Speciications:
Ethernet Parameters:
Number of ports: 1
Interface standard: RJ45 interface
LAN Ethernet: 10 / 100Mbps
Data cache: 6K bytes
Protection: 2KV electromagnetic isolation
Network protocols: IP, ARP, TCP, UDP, ICMP, IGMP, DCHP and so on
Serial Port Parameters:
Number of ports: 1
Interface standard: TTL serial port, 2.54MM pin, 3.3V or 5V level
Baud rate: 300 ~ 921600bps
Data bits: 5,6,7,8,9
Stop bit: 1,2 bit
Parity: no parity, odd parity, even parity
Flow Control: None
Cache: 2K bytes
Supporting Software:
Parameter configuration: network configuration software, serial AT command
Module testing: test software (network, serial one)
Basic Parameters:
Size 43mmx23mmx14.5mm (length x width x height)
Working voltage DC3.3V / 5V
Operating current 200mA @ 5V
Power consumption ≤ 1W
Operating temperature -40 ~ 85 ° C
Storage temperature -55 ~ 125 ° C
Pin Description:
1. RESET: Factory reset pin, the module power-on detection, active low
2. DIR: RS485 receive, send switch control pin
3. TCPCS: TCP client mode, the port connection status indicator pin, the connection is successful output low
4. RUN: module running status indication pin, input 2Hz square wave
5. GND: Power Ground Pin
6. 3.3V: 3.3V DC power input pin, greater than 200mA, and 5V DC power supply optional
7. GND: Power Ground Pin
8. 5V: 5V DC power input pin, greater than 200mA, and 3.3V DC power supply can choose one of two
9. RSTI: reset pin, the internal pull-up, low-effective, can not be vacant
10. CFG: serial port configuration module enable pin, built-in pull-up, low-effective, do not have to be vacant
11. RXD: Serial data receive pin, serial port TTL level, compatible with 3.3V and 5V
12. TXD: serial data transmission pin, serial TTL level, compatible with 3.3V and 5V
13. GND: Power Ground Pin
14. 3.3V: 3.3V DC power input pin, greater than 200mA, and 5V DC power supply optional
15. GND: Power Ground Pin
16. 5V: 5V DC power input pin, greater than 200mA, with the optional 3.3V DC power supply can be.
Package Included:
1 x CH9121 Serial Port RS232 to Ethernet Network Module