To confirm that this part fits your vehicle, please enter your vehicle's details below.
- Clear All
Show all compatible vehicles
Eachine TriangleD 5.8G 40CH 25/100/200/400mW Switchable Triangle AV FPV Transmitter VTX With DVR Support Smart Audio Tramp for Tinywhoop
Item name: FPV Transmitter
Input voltage: 5V
Current consumption: 337mA~615mA(type)
Extra features: DVR/ Smart audio(Compatible with SA and TR)
Power supply: 5V output for Camera
Output power: 25mW/100mW/200mW/400mW switchable
Antenna connector: IPEX(RG178 antenna)
Cable connector: JST SH1.0 3pin for Camera
JST SH1.0 5pin for Connect with Flight controller
Compress Format: AVI
Video Output format: NTSC
Record video size: 1280×720
Support TF card: Max.32G
Weight: 3.5g (excluding antenna)
Dimensions: 29mm*29mm*40mm, 25.5 stackable hole
Kit contents: 1*VTX, 3*cable, 1*Antenna, 1*Instructions
Button control Channel select mode
Select channels by simple short presses.
Blue LED light on stands for CH1,short presses to change 8 channels sequentially.
For CH2/3/4/5/6/7/8, Blue LED flicker once, it won't light on.
Notice:Blue LED only light on for CH1
Press button for 2S, Green LED will flash, then short presses to select 5 bands.
Press button for 8S,Red LED P1 will flash,then select power by simple short presses to select 25mW/100mW/200mW sequentially,For 100mW, Red LED flicker once,it won't light on;For 200mW Red LED flicker once,it won't light on .Press the button again ,Red LED lights together,Represents the highest power 400mW.
Notice:Red LED only light on for 25mW.
Easily get the DVR function works by inserting an TF card.Max 32G TF card supported.Press button S1 to start recording or pause recording. Red DVR indicator blinking while recording.Red DVR indicator light on constantly while non-recording.The maximum recording time of each video is 10 minutes. Otherwise,it will be automatically saved as another video.
Notice:If the temperature is too high, please pause for 30 seconds and continue to work.
While in Pit Mode you can change channels and set power levels , but none of these changes will take effect until you quit Pit Mode.By default ,Pit Mode will send a very weak signal.
Two ways to exit pit mode:
Press button 12S until all 16 LED turned off and light on again to exit pit mode,or you can exit pit mode via Betaflight OSD.
Notice:The VTX has memory for settings,To change the settings ,please repeat steps as above.
* With the function of DVR(Resolution 1280×720)
* Support Smart audio(Compatible with SA and TR)
* 25mW/100mW/200mW/400mW Power Switchable
* 5V input with 5V output for camera
* Short touch the button to Start/Stop Video recorder
* The video will split to 10 minutes automatically
* Small size , lighter only
1x Eachine TriangleD FPV Transmitter