To confirm that this part fits your vehicle, please enter your vehicle's details below.
- Clear All
Show all compatible vehicles
|Input Voltage||12 V|
|Maximum Voltage||24 A|
|Maximum Flow Rate||3.0L/min|
|Using time||30 Min|
|Battery capacity||1800 mA|
|Peak machine pressure||22 bar|
Installation and Operation:
①Dead work: Unload battery pack, install battery pack
②Install straight sprinkler head ,after the nozzleis installed, the left and right nozzles are checked to see if the installation is in place.
③Connecting pipe, when the water pipe is installed, check the connection of the light pipe.If the water pipe does not fall off ,it has been installed in place.
④Connecting self provided plumbing(selection):remove the water pipe connector. Connect the home garden water pipe matching the interface.
⑤Open the machine: For the first time, the air in the water pipe should be discharged. The method is to place the washing machine in the position of waist height.(<1.5 meters), and then select the high voltage mode. The water enters the water pipe and is ejected from the washing machine before cleaning.The whole process takes about 20 seconds.
⑥Selection of water spray effect:
Water effect must be selected according to the working conditions, rotating head. 0-40 degree for cleaning,and suitable for irrigation. Do not switch the spray after boot.
⑦Clean: please clean the machine with clean water after sea water is used.
Battery pack safely warning
(1)Do not disassemble, open or cut up battery pack.
(2)It is forbidden to short-circuit the battery pack.Do not place batteries in boxed or drawers at will to avoid short circuit between them or by other metal objects.
(3)It is forbidden to expose batteries to heat sources or flames.Avoid storing under direct sunlight.
(4)Do not remove batteries or batteries from their original packing before use.
(5) It is forbidden to organize the battery by mechanical impact.
1* Car Washer
1*long pole brush
1*multi functional bar
2* lithium battery