Free Shipping

ZFX-W2062 Microcomputer Digital Electronic Temperature Controller Fahrenheit Celsius Conversion Adjustable Digital Display


To confirm that this part fits your vehicle, please enter your vehicle's details below.

  • Year:


    • Make:


      • Model:


        • Submodel:


          • Trim:


            • Engine:


              • Clear All
              This part is compatible with 0 vehicle(s).
              Show all compatible vehicles
              This part is compatible with 1 vehicle(s) matching
              This part is not compatible with
              Recent searches

                • Year
                • Make
                • Model
                • Submodel
                • Trim
                • Engine

                  Temperature range: -50~110°C
                  Resolution: 0.1°C/-9.9~99.9; 1°C/other
                  Measurement accuracy: 0.1 ° C
                  Refresh rate: 0.5S
                  High temperature protection: 0-110 ° C
                  Input voltage: 12V/24V DC
                  Measurement input: NTC (10K0.5%) waterproof sensor
                  Output: 1channel 10A relay
                  Environmental requirements: -10~60°C; humidity 20%-85%
                  Size: 48*29*32mm
                  Opening size: 46*26.5mm
                  Power consumption: quiescent current <35mA pull-in current <65mA
                  Instructions for Use:
                  1. Connect the power supply and load, that is, supply power to the controller. At this time, the red color is displayed as the measured temperature, and the blue color below is the required set temperature. Press SET(+)C/F(+) to set the required The set temperature is automatically confirmed and returned after 3 seconds of setting. At this time, the controller automatically performs relay energization according to the setting. The output of the thermostat is 10A relay, which satisfies the high power load. Please ensure the line is correct.
                  2. Parameter setting: Press and hold SET for 5 seconds to enter the main menu setting. Press SET(+)C/F(-) to switch P0-P8. When adjusting parameters P0-P8, if you need to adjust P0, press SET at the same time. +) C/F (-) adjustment, after adjusting OK, press SET (+) C / F (-) at the same time to confirm, P1-P8 set as P0.
                  Indicator light: off means the relay is off, steady light means the relay is closed
                  Digital tube: The above shows that LL is the sensor open circuit; the display HH is out of the measurement range (the temperature controller will forcibly open the relay display, which is high temperature protection.)
                  C/F key: Celsius or Fahrenheit conversion key
                  Package Included:
                  1 x Microcomputer Digital Electronic Temperature Controller Fahrenheit Celsius Adjustable

                  Leave a Comment