Free Shipping

1000ML/Bottle 355nm-410nm Natural Green UV Sensitive Polyester Resin LCD Light Curing Material for LCD Resin 3D Printer


To confirm that this part fits your vehicle, please enter your vehicle's details below.

  • Year:


    • Make:


      • Model:


        • Submodel:


          • Trim:


            • Engine:


              • Clear All
              This part is compatible with 0 vehicle(s).
              Show all compatible vehicles
              This part is compatible with 1 vehicle(s) matching
              This part is not compatible with
              Recent searches

                • Year
                • Make
                • Model
                • Submodel
                • Trim
                • Engine


                  1. With soybean oil as raw material, BPA-free, benzene-free, no stimulation, no VOCs volatilization, in line with EN 71-3:2013 natural LCD light curing material.
                  2. Short curing time, the molding process temperature is not deformed, printed pieces have smooth surface and high precision. 
                  3. Printed pieces has good strength and flexibility, excellent molding and impact resistance, and has certain elasticity.
                  4. Can be used on all LCD 3D printers.
                  5. 1000ml/bottle polyester resin

                  1. Viscosity: 150-300(25℃, Rotary viscometer(25℃)
                  2. Wavelength: 355nm-410nm
                  3. Density: 1.05-1.25g/cm3 (Densitometer(25℃))
                  4. The resin meets the requirements below:
                    Volatile organic compounds≤1%, benzene, toluene, xylene and ethylbenzene≤20mg/kg, antimony≤5mg/kg, arsenic≤5mg/kg, barium≤10mg/kg, cadmium≤5mg/kg, chromium≤5mg/kg, lead≤10mg/k, HG≤5mg/kg, selenium≤5mg/kg, Lead, cadmium, hexavalent chromium, total mercury≤10mg/kg, phthalate0.003PPM, PAHS polycyclic aromatic hydrocarbons0.02PPM,2,2- Bis(4-hydroxyphenyl)propane(BPA)≤0.2 mg/kg.
                  Parameters After Printing:
                  Flexural modulus: 1.882-2.385Mpa
                  Flexural strength: 59-70MPa
                  Hot deformation temp.: 80℃
                  Volume shrinkage: 95*E-6
                  Linear shrinkage: 3.72-4.24%
                  Tensile strength: 1.05-1.35%
                  Tensile modulus: 36-52MPa
                  Elongation at break: 1.779-2.385MPa
                  Hardness(Shore D): 11%-20%
                  Glass transition temp.: 84D
                  Glass transition temp.: 100℃
                  Density: 1.05-1.25g/cm3
                  Notched impact strength: 44-49j/m
                  BPA content: ≤ 3 ppm

                  Package Included:

                   1 x 1000ml Polyester Resin LCD Light Curing Material 

                  Leave a Comment