Price:
US$391.99
- Brand: iFlight
- Camera Resolution: HD
- Size: 5 Inch
- Version: PNP,BNF
- Voltage: 4S
Precise details:
Introduction:
Nazgul5 HD is a 5" size BNF (Bind-and-Fly) quadcopter with Caddx Vista Digital HD System on it. We sticked the lighter Caddx Vista on one of our new updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING 2207 with LED light motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!
Note: R81-SPI Frsky (Compatible with Frsky ACCST D8）
Description:
Brand: iFlight
Item Name: Nazgul5 V2 HD FPV Racing Drone
- SucceX-E F7 45A flight stack
- XING 2207 FPV Motor with LED light (4S 2450KV)
- Wheelbase: 240mm*240mm
- Body size: 170*170mm
- Propeller size: 5 inch /5.1 inch
- FC pattern: 30.5*30.5/20*20 mm
- FPV cam spacing: 19mm
- Weight: 408.5g (without battery)
| XL5 V5 Frame |
|
| SucceX-E F7 Flight controller |
– MCU: STM32F22RET6 216MHz – Gyro: MPU6000 – Baro: DSP310 – OSD: IFLIGHT OSD （AT7456E） – BEC: 5V 2.5A – BlackBox: 16MB – Uart: 4*UART(UART1、UART2、UART4、UART5) - UART1 for VTX HD（for 4-6S Vista，for 4S DJI Air Unit）/AnalogTelemetry – UART2 for Receiver – UART4 for Free – UART5 for ESC Telemetry – 4×Dshot/PWM outputs – Smartaudio & IRC Tramp VTX protocol supported – WS2812 led Strip: Yes – Bepper: Yes – Firmware: IFLIGHT_SUCCEX_E_F7 - Outer Size: 36*36mm / 30.5*30.5/φ4 mounting – Weight: 6.9g – Mounting hole: 30.5*30.5mm，φ4mm
– Size: 36*36mm |
| SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC |
– Dimension: 36*43mm – Mounting Holes: 30.5*30.5mm/Φ3mm – Weight: 15g (without wire) – Supports 2-6S Lipo input - EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware – Current sensor: YES – BEC: NO - Constant: 45A / Burst: 50A – Supports: DShot150/300/600/MultiShot/OneShot etc.
– Target: G-H-30 BLS 16.7 |
Features:
– 5mm arm design for more durability
– Easy-Swap arms
- LED illuminated Logo
- XING 2207 motors with LED light
– 5" version also fits 5.1" style propellers
– Popular True-X configuration
– TPU crash-guards
– Fits both 30.5x and 20x stacks
Additional Suggested Parts (Not Included):
Battery: 4S 1550mAh
Camera Mount for Gopro
Package Included:
- 1x XL5 V5 Frame
- 1x Caddx Nebula Nano Digital HD System Kit
- 1x Albatross LHCP RP-SMA 5.8g Antenna
- 2sets x Nazgul 5 inch 3-blades (Set of 4 – Color may vary)
- 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
- 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)
- Note: Camera Mount for Gopro is not included.
Important
The DJI Remote Controller is recommended for beginners since you won't need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don't choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter. and then bind to your own radio as usual.
PRE-TUNED & PRE-SETUP:
– Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
– Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"