New Multi-functional 8 Kinds Electric Massager Therapy

Multi-functional 8 Kinds Electric Massager Therapy

Specifications:
Name:Name:USB Mini The Aged Electric Multifunctional Dual-Output Cervical Vertebra Massager
Function: Acupuncture, thumping, massage, cupping, scraping, immune regulation
Colour: White
Output Voltage: 4.5V
Input Voltage: 100-240V 50/60Hz
Massager :4.5V(Built in 3x Dry battery )
Working Current:17mA(Resistance lead 1K)
Control Mode: Mechanical type
Working Time: 3 Consecutive Hours For normal use
Size:approx.13.2×6.9×3.3cm
 
Features:
– Super 8 Patch Output, for 2 people to use at the same time
Note: Due to the use of 8 Patch at the same time, the power is too high, and the reduction of force under the same gear is a normal phenomenon.
– 4/8 Patch can be used at the same time, but not only 2 Patch , using 2 Patch requires two additional wires to use.
– Double-hole output
– When viscous drop occurs, new patches should be replaced for use. Otherwise, it can not achieve the normal effect of rational treatment, but also accompanied by a tingling sensations.
– Use digital technology to treat patients more accurately
– Super LCD screen, more convenient to use
– Infrared Electrode Therapy Deeper
– Wonderful waveform combination, so that you can really experience the real feeling of acupuncture, thumping back, massage, cupping, massage, scraping.
– Using pulses electric stimulation of different waveforms to strengthen the stimulating effect of acupuncture at auricular points, so as to achieve the purpose of enhancing curative effect and reducing blood pressure and hypnosis.
– Meridian guidance to find acupoints conveniently
– LCD meridian diagram can be equipped with specific acupoints for guiding treatment according to different symptoms. If you only need massage to alleviate fatigue, you can also use it according to acupoint diagram or directly placed in uncomfortable parts. The operation is simple and convenient.
– Delicate, lightweight and easy to carry
– Easy to operate and easy to master
– Supporting battery and power supply modes
 
Correct methods of use:
1. Prepare before use:
* Install the battery: Pull the battery cover apart gently, and then load the 3 sections of No. 7 battery according to the position of positive and negative electrodes.
* Prepare the electrode: Tear off the protective paper of the patch gently, then paste the patch on the winding board after use.
* Electrode Position: Dry the treated area with a wet towel, remove oil and sweat stains, and then paste the electrodes directly to the treated area. The two electrodes should be placed on the body surface at the same time, otherwise the treatment can not be carried out, and the electrodes need not be placed symmetrically.
 
2. Specific methods of operation:
* Turn on the power supply: press the switch, the LCD screen is on, and the treatment mode indicates that the arrow points to the acupuncture mode. At this time, the intensity is 0 and the time is 15 minutes.
* Select Chinese and English display: press the Chinese and English display key, the display can be converted into Chinese or English.
* Choose treatment mode: According to the function selection key, we can choose any treatment mode of acupuncture, hammering, massage, cupping, massage, scraping, slimming and immunoregulation in turn.
* Strength adjustment: Press the strength adjustment key and adjust it to the appropriate strength.
* Timing Choice: 5-15 minutes can be selected, and 5 minutes can be added each time.
 
3. Notes:
* If you need to use it again, please press the switch button again and repeat the above steps.
* During the course of treatment, if the treatment mode is changed, the intensity will automatically default to zero gear, at this time only need to readjust your appropriate intensity.
* During the course of treatment, if the treatment site is changed, that is, the electrode position should be changed, the switch key should be pressed first, and then the above steps should be followed after the shutdown.
* If the treatment stops, press the switch key first, turn off the machine and then remove the electrode.
* Remove the electrodes from the mainframe, pull the plug part and cut the pull wire.
 
4. Product custody and maintenance methods:
* Clean main engine: wipe with soft cloth, slice and neglect to use diluent, gasoline or volatile liquid.
* Clean electrode sheet: The stolen material on the electrode sheet can be wiped with a wet cloth or washed with clean water immediately and then dried, which can be reused.
* Storage: Keep the therapeutic instrument out of reach of children, away from humidity, high temperature, direct sunshine and water splash. Batteries should be removed if they are not used for a long time.
 
Package Included:
1x Vertebra Massager
8x Patch
1x Four lead wire
1x Power adapter
1x USB Line
3x Dry battery
1x Manual

More Details: